Home > Membrane Products > FerroCep® > Module Specifications
Introduction
Benefits
Membrane Specifications
Module Specifications
Applications
 

Module Specifications
F2.5-A-0.3M
F4-A-2.4M
F6-A-5.4M
F14-A-60M
F20-A-121M
F26-A-202M
 
Nominal Module Length (m)  
1.5
3
6
  
 
Nominal Pore Size (µm)  
0.1 / 0.02
  
 
Max Tube per Module (pc)  
4
14
31
164
346
566
  
  Clean Water Flux  
(m³/module.hr @ 1bar)  
MF Membrane  
0.4
2.8
6.2
65.6
138.4
226.5
  
UF Membrane  
0.1
0.9
2.1
22.6
47.7
78.1
  
 
Flow Type  
Inside - Out
  
 
Tube Pass  
1
2
 
Feed Connection (mm)  
65
 100 150
200
250
350
  
 
Permeate Concentrate (mm)  
25
 38 50
50
100
150
  
 
Norminal Module OD (mm)  
65
 100 150
350
500
650
  
 
Permeate Volume (L)  
2.3
 14 30
209
401
720
  
 
Concentrate Volume (L)  
1.5
 11 25
250
528
864
  
 
Max Operating Pressure (bar)  
Up to 10.3
 
Max Operating Temperature (°C)  
Up To 140 (Depend On Design Requirement)
 
- All standard FerroCep® membrane is coated with TiO2. However, uncoated membrane is also available upon request.
- Each FerroCep® module is designed and optimized to fit your application needs. Some of the critical design parameters include:
1. The max. and min. of operation pressures temperatures of the specific application process
2. Velocity in the membrane
3. Transmembrane pressure